configure mpls rsvp-te lsp delete path

configure mpls rsvp-te lsp lsp_name delete path [path_name | any | all]

Description

Deletes a path from the specified RSVP-TE LSP.

Syntax Description

lsp_name Specifies a name for the RSVP-TE LSP.
path_name Specifies a name for the path to be deleted from the RSVP-TE LSP.
any Configures the specified LSP to use any path.
all Deletes all added paths from the specified RSVP-TE LSP.

Default

N/A.

Usage Guidelines

This command deletes a path from the specified RSVP-TE LSP. All the added paths can be deleted by specifying the all keyword. If the active path is deleted, then one of the other configured paths becomes the active path for the LSP. If there are no other defined paths, then the LSP is marked down and cannot be used to forward IP or VPN traffic.

Example

The following command deletes the path called through-knightsbridge for the LSP london:

configure mpls rsvp-te lsp london delete path through-knightsbridge

History

This command was first available in ExtremeXOS 11.6.

Platform Availability

This command is available only on the platforms that support MPLS as described in the ExtremeXOS 30.7 Feature License Requirements document.