Enables the STP protocol for one or all STPDs.
| stpd_name | Specifies an STPD name on the switch. |
Enabled.
If you want to enable the STP protocol for all STPDs, do not specify an STPD name.
The following command enables an STPD named Backbone_st:
enable stpd backbone_st
This command was first available in ExtremeXOS 10.1.
This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.