Use this command to set the NetLogin system traps.
| enable | Enable sending traps when max users reached in system |
| disable | Disable sending traps when max users reached in system |
Disabled.
The specifications from this command appear in show configuration {module-name} {detail} for "policy" and "netlogin."
This example shows how to enable the NetLogin maximum users trap setting:
configure netlogin trap max-users enabled
This command was first available in ExtremeXOS 16.1.
This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.