Displays real-time port utilization information. The total utilization displays as real-time information, constantly refreshing. and the parameter displays show a snapshot of the activity on the port when you issue the command.
|
mgmt |
Specifies the management port. |
|
port_list |
Specifies one or more ports or slots and ports. |
|
tag |
Specifies an 802.1Q or 802.1ad tag value. |
|
stacking-port_list |
Specifies one or more stacking slots and ports. |
|
bandwidth |
Specifies port utilization as percentage of bandwidth. |
|
bytes |
Specifies port utilization in bytes per second. |
|
packet |
Specifies port utilization in packets per second. |
N/A.
The software continuously monitors port utilization and calculates bandwidth as a function of each port‘s maximum link capacity.
The total utilization display presents real-time statistics. Use the spacebar to toggle the real-time displayed information for packets, bytes, and bandwidth in that order. When you use a parameter (packets, bytes, or bandwidth) with the command, the display for the specified type shows a snapshot per port when you issued the command. When the show ports utilization command is run with the bandwidth, bytes, or packets options, the command may need to be repeated a few times in order for the ExtremeXOS software to gather enough statistics to calculate appropriate values.
If you do not specify a port number, range of ports, or tag value, port utilization information is displayed for all ports.
The tag value may be associated with either a VMAN or a VLAN.
This status information may be useful for your technical support representative if you have a network problem.
The following command displays utilization statistics for port 1 on a stand-alone switch:
show ports 1 utilization
The following example shows sample output from the show ports utilization packets command:
Link Utilization Averages Mon Oct 6 22:38:25 2008 Port Link Rx Peak Rx Tx Peak Tx State pkts/sec pkts/sec pkts/sec pkts/sec ================================================================================ 1:1 A 47 191 0 0 1:2 A 0 0 0 0 2:1 R 0 0 0 0 2:2 R 0 0 0 0 3:1 R 0 0 0 0 3:2 R 0 0 0 0 4:1 R 0 0 0 0 4:2 R 0 0 0 0 5:1 R 0 0 0 0 5:2 R 0 0 0 0 6:1 R 0 0 0 0 6:2 R 0 0 0 0 7:1 R 0 0 0 0 7:2 R 0 0 0 0 ================================================================================ > indicates Port Display Name truncated past 8 characters Link State: A-Active, R-Ready, NP-Port Not Present, L-Loopback Spacebar->toggle screen U->page up D->page down ESC->exit
Note
Use the spacebar to toggle this real-time display for all ports from packets to bytes to bandwidth, in that order.
The following example shows sample output from the show ports utilization bytes command:
Link Utilization Averages Mon Oct 6 22:39:22 2008 Port Link Rx Peak Rx Tx Peak Tx State bytes/sec bytes/sec bytes/sec bytes/sec ================================================================================ 1:1 A 0 0 0 63 1:2 A 0 63 63 63 2:1 R 0 0 0 0 2:2 R 0 0 0 0 3:1 R 0 0 0 0 3:2 R 0 0 0 0 4:1 R 0 0 0 0 4:2 R 0 0 0 0 5:1 R 0 0 0 0 5:2 R 0 0 0 0 6:1 R 0 0 0 0 6:2 R 0 0 0 0 7:1 R 0 0 0 0 7:2 R 0 0 0 0 ================================================================================ > indicates Port Display Name truncated past 8 characters Link State: A-Active, R-Ready, NP-Port Not Present, L-Loopback Spacebar->toggle screen U->page up D->page down ESC->exit
The following example shows sample output of the show ports utilization bandwidth command:
Link Utilization Averages Mon Oct 6 22:39:46 2008 Port Link Link Rx Peak Rx Tx Peak Tx State Speed % bandwidth % bandwidth % bandwidth % bandwidth ================================================================================ 1:1 A 100 0.00 0.03 0.00 0.00 1:2 A 100 0.00 0.00 0.00 0.00 2:1 R 0 0.00 0.00 0.00 0.00 2:2 R 0 0.00 0.00 0.00 0.00 3:1 R 0 0.00 0.00 0.00 0.00 3:2 R 0 0.00 0.00 0.00 0.00 4:1 R 0 0.00 0.00 0.00 0.00 4:2 R 0 0.00 0.00 0.00 0.00 5:1 R 0 0.00 0.00 0.00 0.00 5:2 R 0 0.00 0.00 0.00 0.00 6:1 R 0 0.00 0.00 0.00 0.00 6:2 R 0 0.00 0.00 0.00 0.00 7:1 R 0 0.00 0.00 0.00 0.00 7:2 R 0 0.00 0.00 0.00 0.00 ================================================================================ > indicates Port Display Name truncated past 8 characters Link State: A-Active, R-Ready, NP-Port Not Present, L-Loopback Spacebar->toggle screen U->page up D->page down ESC->exit
This command was first available in ExtremeXOS 11.3.
The tag value was added in ExtremeXOS 12.4.4.
This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches. The stack-ports option is available only on SummitStack.