configure syslog tls cipher

configure syslog tls cipher [[cipher | all] on | cipher off]

Description

Turns on/off ciphers for Syslog Transport Layer Security (TLS) sessions.


syslog	Specifies configuring the remote Syslog target.
tls	Transport Layer Security (TLS) protocol.
cipher	Specifies configuring the algorithm to use for encrypting Syslog TLS sessions.
`cipher`	Specifies the cipher name to enable or disable.
all	Specifies all ciphers for enabling.
on	Enable selected cipher. Default is that all ciphers are on.
off	Disables selected cipher.

By default, all ciphers are enabled.

A minimum of one cipher must be enabled.

The following is the list of available ciphers:

To view which ciphers are enabled and disabled, use the command show log configuration.

The following example enables all ciphers for Syslog TLS sessions:

configure syslog tls cipher all on

The following example disables the aes128-sha cipher for Syslog TLS sessions:

configure syslog tls cipher aes128-sha off

This command was first available in ExtremeXOS 22.4.

This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.