Use this command to clear a VLAN to policy mapping table entry or to reset the maptable response to the default value of policy mode.
| maptable | Clear VLAN ID - Policy Profile mappings table. |
| response | Specifies that the response should be reset to the default value of policy. |
| vlan_list | Specifies the VLAN ID or range of IDs (1 to 4094) to clear. |
N/A.
This example resets the policy mappings table response to the default value of policy.
unconfigure policy maptable response
This command was first available in ExtremeXOS 16.1.
This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.