Changes a previously configured MD level for the specified domain.
|
domain_name |
Enter the name of the domain for which you want to change the MD level. |
|
level |
Specifies the new MD level you are assigning to this domain. Enter a value between 0 and 7. |
N/A.
You can have up to 8 domains on a switch, and each one must have a unique MD level. Thus, a given MD level exists only once one a switch.
5 to 7 for end users
3 and 4 for Internet service providers (ISPs)
0 to 2 for operators (entities carrying the information for the ISPs)
The following command changes the MD level of a previously created domain extreme to 2:
configure cfm domain extreme md-level 2
This command was first available in ExtremeXOS 11.4.
This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.