Deletes one or more CVIDs from a CEP.
| vman_name | Specifies the VMAN to configure. |
| vman_list | Specifies the VMAN list to configure. |
| port_list | Specifies a list of ports. |
| cvid_first | Specifies a CVID or the first in a range of CVIDs that are to be deleted. Valid values are 1-4095. |
| cvid_last | Specifies the last in a range of CVIDs that are to be deleted. Valid values are 1-4095. |
N/A.
Each CEP has its own CVID map, and this command deletes CVIDs only from the ports specified with this command.
If all the CVIDs are deleted from a CEP, the CEP is deleted from the VMAN.
To view the CEP CVID configuration for a port, use the show vman command.
The following command deletes CVID 15 on port 1 from VMAN vman1:
configure vman vman1 port 1 delete cvid 15
This command was first available in ExtremeXOS 12.6.
The vman_list variable was added in ExtremeXOS 16.1.
This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.