show l2pt profile

show l2pt profile profile_name

Description

Displays the contents of an L2PT profile.

Syntax Description


profile	Displays profile that defines L2PT configuration for L2 protocols.
`profile_name`	Displays only the specified profile.

Default

Disabled.

Usage Guidelines

Use this command to display the contents of an L2PT profile.

Example

The following is an example of the command's output:

# show l2pt profile 
Profile Name                   Protocol Filter Name              Action  CoS
-----------------------------  --------------------------------  ------  ---
my_l2pt_access_prof            my_list                           tunnel    1                                 
                               my_other_list                     tunnel    7
my_l2pt_network_prof           mylist                            encap                                  
                               my_other_list                     encap                                 
                               my_none_list                     none 

# show l2pt profile my_l2pt_access_prof 
Profile Name                   Protocol Filter Name              Action  CoS
-----------------------------  --------------------------------  ------  ---
my_l2pt_access_prof            my_list                           tunnel    1                                 
                               my_other_list                     tunnel    7

History

This command was first available in ExtremeXOS 15.5.

Platform Availability

This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.