Enable the CLEAR-Flow agent.
This command has no arguments or variables.
CLEAR-Flow is disabled by default.
When the CLEAR-Flow agent is enabled, sampling begins and actions are taken based on the CLEAR-Flow rules that are configured on the switch.
The following example enables CLEAR-Flow on the switch:
# enable clear-flow
This command was first available in ExtremeXOS 11.1.
This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, and X870 series switches.