This command shows NTP information for the specified VR.
ntp | Network Time Protocol. |
vr | Specifies showing NTP information for a given VR. |
vr_name | Specifies which VR to show information about. If a VR name is not specified, the VR of the current command context is used. |
If a VR name is not specified, the VR of the current command context is used.
The following example shows NTP information for VR "vr1".
# show ntp NTP : Enabled Authentication : Disabled Broadcast-Client : Disabled VR : vr1
This command was first available in ExtremeXOS 22.2.
This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.