show twamp reflector

Description

This command displays the configured values and run-time information of the Session-Reflector and its endpoints.

Syntax Description

This command has no arguments or variables.

Default

N/A.

Usage Guidelines

None.

Example

# show twamp reflector
TWAMP Session-Reflector Enabled

  Session Information 
        Used: 165 of 200 
        Timeout: 300 seconds
Endpoints                  Port Sessions    Rx Packets         Tx Packets 
------------------------- ----- --------  ------------       ------------
19.1.1.100                5000        5          3091                 3091
19.1.1.100                5001       40          5521                 5521
19.1.1.100                5002       40          4728                 4728 
19.1.1.100                5003       40          3916                 3916
18.1.1.100                5000       40          9266                 9266 

Displayed 5 endpoints

History

This command was first available in ExtremeXOS 16.1.

Platform Availability

This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.