Enables and disables the new-root trap.
| stpd_name | Specifies an STPD name on the switch. |
| on | Enables the new-root trap. |
| off | Disables the new-root trap. |
By default, the trap is enabled (on).
The new-root trap is sent when the new root bridge is elected.
The following example disables the new-root trap for the STP domain r1.
configure stpd r1 trap new-root off
This command was first available in ExtremeXOS 15.7.1.
This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.