Configures the include-SCI flag to ensure interoperability with third-party devices that do not decode encrypted MAC Security (MACsec) packets when the SCI is not present.
include-sci | Provision inclusion of SCI in SecTAG field while transmitting MACsec frames. |
enable | Include SCI in SecTAG. |
disable | Do not include SCI in SecTAG (Default). |
ports | Specifies configuring ports. |
port_list | Lists which ports to configure the include-SCI flag on. |
Disabled by default (SCI is not included in MAC Security Tag (SecTAG)).
The SecTAG appended to each data packet contains an optional parameter called Secure Channel Indicator (SCI). The SCI is used to identify the sending Secure Association (SA) when the connectivity-association (CA) comprises three or more peers.
Because ExtremeXOS only supports point-to-point links (which have exactly two peers), the SCI is not sent by default (which saves 8-octets per SecTAG‘d packet). Certain third-party MACsec devices, such as the CentOS‘s MACsec client and Cisco Catalyst 3650, fail to decode encrypted MACsec packets when the SCI is not present. To ensure interoperability with such devices, you can configure the Include-SCI flag. When this flag is set, the port always includes the 8-octet SCI in the SecTAG of all outgoing packets.
Important
After enabling MACsec, if you change the include-SCI flag, you must run the configure macsec initialize ports port_list command afterward. Otherwise, the change is not applied.configure macsec include-sci enable port 13
# configure macsec include-sci disable port 44
This command was first available in ExtremeXOS 30.1.
This command is available on the following platforms.
Note
The MACsec feature requires the installation of the MAC Security feature pack license.Platform | Ports | LRM/MACsec Adapter Required? |
---|---|---|
ExtremeSwitching X460-G2-24p-24hp, X460-G2-24t-24ht switches | Half-duplex, 1G ports (25–48) | No |
All other SFP/SFP+ ports * | Yes | |
ExtremeSwitching X450-G2, X460-G2, X670-G2, X440-G2, X590, X620, X690, and X695 series switches | SFP/SFP+ ports * | Yes |
ExtremeSwitching X465 |
X465-24W, X465-24XE: ports 1–24 X465-48T, X465-48P, X465-48W, X465i-48W: ports 1–48 X465-24MU-24W: ports 25–48 VIM5-4XE: all 4 ports VIM5-4YE in X465-24MU, X465-24MU-24W switches: all 4 ports VIM5-4YE in X465-24W, X465-48T, X465-48P, X465-48W, X464.24S, X465-24S, X465i-48W: first 2 ports only |
No |
Note: * For ExtremeSwitching X460-G2
series switches, the VIM-2X option does not support the
LRM/MACsec Adapter.
|