configure ports dot1p

configure ports [port_list | all] dot1p dot1p_priority

Description

This command configures the default dot1p priority to be used for the internal priority for untagged traffic on the specified port.

Syntax Description


`port_list`	Specifies a port list.
all	Specifies all ports.
`dot1p_priority`	Priority number from 0 to 7 to be used for untagged packets.

Default

Usage Guidelines

Use this command to configure the default dot1p priority to be used for the internal priority for untagged traffic on the specified port. This priority is used for untagged frames when dot1p examination is enabled on a port.

History

This command was first available in ExtremeXOS 16.1.

Platform Availability

This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.