show radius

Example

The following sample output displays the current RADIUS client configuration and statistics for both management and network login:

#show radius
Radius Algorithm: standard
Radius Retries: 3
RADIUS dynamic-authorization: disabled
Switch Management Radius: enabled
Switch Management Radius server connect time out: 3 seconds *
Switch Management Radius Accounting: disabled *
Switch Management Radius Accounting server connect time out: 3 seconds *
Netlogin Radius: enabled
Netlogin Radius server connect time out: 3 seconds *
Netlogin Radius Accounting: disabled *
Netlogin Radius Accounting server connect time out: 3 seconds * 

Primary Switch Management Radius server: Status: Active   
        host name     :   
        IP address    :  10.51.1.150   
        Server IP Port:  1812   
        Client address:  10.50.130.152 VR-Mgmt)
        Retries       :  Not Set (Using Default Retry value)
        Timeout       :  Not Set (Using Default Timeout value)   
        shared secret :  @~|ioBnao`ox#s
Access Requests   :  0          Access Accepts    :  0
Access Rejects    :  0          Access Challenges :  0
Access Retransmits:  0          Client timeouts   :  0
Bad authenticators:  0          Unknown types     :  0
Round Trip Time   :  0 

Radius server     :  1001 Status: Active   
        host name     :   
        IP address    :  10.51.1.150   
        Server IP Port:  1812   
        Client address:  10.50.130.152 VR-Mgmt)
        Retries       :  Not Set (Using Default Retry value)    
        Timeout       :  Not Set (Using Default Timeout value)    
        Realm         :  Any   
        shared secret :  @~|ioBnao`ox#s
Access Requests   :  11         Access Accepts    :  5
Access Rejects    :  1          Access Challenges :  0
Access Retransmits:  4          Client timeouts   :  5
Bad authenticators:  0          Unknown types     :  0
Round Trip Time   :  0