Displays the configured number of IPv4 and IPv6 routes reserved in the Longest Prefix Match (LPM) hardware table.
| slot_num | For SummitStack only, this option displays the reservations for the specified slot. |
N/A.
The IPv4 Routes column in the command output shows whether IPv4 routes are stored in internal or external LPM tables.
To modify the configuration that this command displays, use the following command:
configure iproute reserved-entries [ num_routes_needed | maximum | default ] slot [all |slot_num]The following example displays the reserved space for IP routes:
Slot-3 Stack.30 # show iproute reserved-entries
IPv4 # Reserved Routes Minimum #
Slot Type Routes IPv4 (or IPv6) IPv4 Hosts
---- ---------------- -------- ------- ------------------ ----------
1 X460G2-48t-10G4 Internal 8144 ( 4072) 4112
2 X460G2-48t-10G4 Internal 8144 ( 4072) 4112
3 X670G2-48x-4q Internal 12240 ( 6120) [default] 4112
4
5
6
7
8
Maximum supported # IPv4 (or IPv6) Reserved Routes:
X435 Internal 32 ( 16)
X440G2, X620 Internal 480 ( 240)
X460G2 Internal 12256 ( 6128)
X450G2, X460G2-16MP Internal 16352 ( 8176)
X465, X590, X690 Internal 16352 ( 8176)
X670G2, X870 Internal 16352 ( 8176)
X695 Internal 32736 ( 16368)
Note: IPv4 Hosts can occupy unused HW Route table space,
unless # Reserved Routes is "maximum".
This command was first available in ExtremeXOS 12.1.
This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.