This command is used for per port setting for the VLAN registration. If the global registration is forbidden, ports cannot be added to any VLAN dynamically irrespective of the per-port setting. So for ports to be registered, the global and the per-port setting both should be “normal”, which is the default value.
| mvrp | Multiple VLAN Registration Protocol. |
| tag | The 802.1Q VLAN ID. |
| vlan_tag | VLAN ID ranging from 1 to 4094; type=uint16_t"; range="[1,4094]". |
| ports | Ports. |
| port_list | Port list separated by a comma or -"; type="portlist_t"; |
| all | All ports. |
| registration | Whether port can be added dynamically to the VLAN. |
| forbidden | Port cannot be added dynamically to the VLAN. |
| normal | Port can be added dynamically to the VLAN. |
Normal.
Use this command to control dynamic addition of ports to VLANs.
configure mvrp tag 2 ports 2,3,4 registration forbidden configure mvrp tag 2 ports all registration normal
This command was first available in ExtremeXOS 15.3.
The registration option, and forbidden and normal keywords were added in 15.3.2.
This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.