Removes a local port or LAG from an MLAG.
|
port |
Specifies a local member port of the MLAG group. |
N/A.
Use this command to remove a local port or LAG from an MLAG.
The following command unbinds the local member port 2:
# disable mlag port 2
This command was first available in ExtremeXOS 12.5.
This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, and X870 series switches.