show bfd session counters vr all

show bfd session {ipv4 | ipv6} {ipaddress} counters {vr [vrname | all]}

Syntax Description


ipv4	Displays all IPv4 sessions.
ipv6	Displays all IPv6 sessions.
`ipaddress`	Displays sessions in specified VR.

Default

Displays all IPv4 sessions counters by default if IPv4 or IPv6 is not specified.

Usage Guidelines

Use this command to display BFD session counters.

To clear the counters, use the clear counters bfd command.

Example

The following command displays the session counters:

# show bfd session counters vr all

Following is sample output from this command:

Neighbor : 10.10.10.1     Interface : vlan10Vr-Name :   bfd_vr10
Valid Rx Pkt         : 87
Total Tx Pkt         : 87
Auth Type Fails      : 0
Authentication Fails : 0
Discarded Pkt        : 0

History

This command was first available in ExtremeXOS 12.4.

IPv6 version of this command was added in ExtremeXOS 15.3.2.

Platform Availability

This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, and X870 series switches.