Shows bridge port extender (BPE) statistics.
| vpex | Specifies Virtual Port Extender (VPEX). |
| bpe | Bridge port extender (BPE). |
| slot | Specifies a specific BPE by slot number. |
| slot_num | Specifies a specific BPE by slot number. |
| statistics | Specifies BPE statistics information and control plane protocol. |
| detail |
Shows detailed BPE statistics information and control plane protocol. When detail is excluded, only non-zero statistics appear; when detail is included, non-zero and zero statistics appear. |
N/A.
This command displays information on a per-BPE basis (cascade ports can be LAG members). If the detail option is not used, only non-zero counts appear.
The following example shows non-detailed statistics information for all BPEs. In this case, there is only one BPE attached at port: 1:45 and assigned to slot 100:
# show vpex bpe statistics
BPE Statistics
BPE: d8:84:66:88:98:2b Cascade Port: 1:45 Slot: 100
Description: Floor1
txRequests : 23432 rxResponses : 23432
txResponses : 52 rxRequests : 52
rxrqErrors : 0 rxrspErrors : 0
Standard Statistics
-------------------
TX Requests RX Responses
cspOpen : 1 1
echanRegister : 2 2
orgSpecific : 23429 23429
TX Responses RX Requests
cspOpen : 1 1
extPortCreate : 47 47
statusParamSet : 4 4
Organizationally Specific Statistics
------------------------------------
TX Requests RX Responses
frmSzeLimSet : 47 47
getBulk : 15488 15488
qCountersGet : 7789 7789
qTrafShaperSet : 51 51
defPrtQoSParSet : 47 47
dtaCtlTrfPriSet : 6 6
ipInterfaceSet : 1 1
RX Requests TX Responses
No Valid Statistics
The following example shows detailed statistics information for all BPEs. In this case, there is only one BPE attached at port: 1:45 and assigned to slot 100:
# show vpex bpe statistics detail
BPE Statistics
BPE: d8:84:66:88:98:2b Cascade Port: 1:45 Slot: 100
txRequests : 23630 rxResponses : 23630
txResponses : 52 rxRequests : 52
rxrqErrors : 0 rxrspErrors : 0
Standard Statistics
-------------------
TX Requests RX Responses
cspOpen : 1 1
extPortCreate : 0 0
extPortDelete : 0 0
portParamSet : 0 0
portParamGet : 0 0
statusParamSet : 0 0
echanRegister : 2 2
echanRegGet : 0 0
statisticsGet : 0 0
transitDelaySet : 0 0
objectGet : 0 0
objectSet : 0 0
cnParamGet : 0 0
cnParamSet : 0 0
orgSpecific : 23627 23627
unsupported : 0 0
TX Responses RX Requests
cspOpen : 1 1
extPortCreate : 47 47
extPortDelete : 0 0
portParamSet : 0 0
portParamGet : 0 0
statusParamSet : 4 4
echanRegister : 0 0
echanRegGet : 0 0
statisticsGet : 0 0
transitDelaySet : 0 0
objectGet : 0 0
objectSet : 0 0
cnParamGet : 0 0
cnParamSet : 0 0
orgSpecific : 0 0
unsupported : 0 0
Organizationally Specific Statistics
------------------------------------
TX Requests RX Responses
reload : 0 0
swapImg : 0 0
imageInfoGet : 0 0
trstdPrtInfGet : 0 0
poeParamSet : 0 0
portCfgSet : 0 0
portOpStatGet : 0 0
frmSzeLimSet : 47 47
frmSzeLimGet : 0 0
lagBalAlgSet : 0 0
ecpParamSet : 0 0
cbMsgRefl : 0 0
envGet : 0 0
closeNotif : 0 0
getBulk : 15620 15620
localMirrSet : 0 0
debugInfoGet : 0 0
qCountersGet : 7857 7857
qTrafShaperSet : 51 51
cpuUtilGet : 0 0
diagSet : 0 0
addtlCapSet : 0 0
defPrtQoSParSet : 47 47
dtaCtlTrfPriSet : 6 6
ipInterfaceSet : 1 1
lagSet : 0 0
portCntrClear : 0 0
poeFltReasGet : 0 0
eeeSet : 0 0
poeGlobParmSet : 0 0
tftpDownload : 0 0
sfpNotifSet : 0 0
diagInfoGet : 0 0
unsupported : 0 0
RX Requests TX Responses
POE Notif : 0 0
cbMsgRefl : 0 0
sfpNotif : 0 0
unsupported : 0 0
This command was first available in ExtremeXOS 22.5.
This command is available on the ExtremeSwitching X670-G2, X465, X690, X590 series switches.