show snmpv3 filter-profile

show snmpv3 filter-profile {[[hex hex_profile_name] | profile_name]} {param [[hex hex_param_name] | param_name]}

Description

Displays the association between parameter names and filter profiles.

Syntax Description


`hex_profile_name`	Specifies the filter profile name. The value is to be supplied as a colon separated string of hex octets.
`profile_name`	Specifies the filter profile name in ASCII format.
`hex_param_name`	Specifies the parameter name. The values is to be supplied as a colon separated string of hex octets.
`param_name`	Specifies the parameter name in ASCII format.

Default

N/A.

Usage Guidelines

Use this command to display the snmpNotifyFilterProfileTable. This table associates a filter profile with a parameter name. The parameter name is associated with target addresses, and the filter profile is associated with a series of filters, so, in effect, you are associating a series of filters with a target address.

Example

The following command displays the entry with filter profile prof1 with the parameter name P1:

show snmpv3 filter-profile prof1 param P1

The following is sample output of this command:

Filter Profile Params Name : p1
Name                       : prof1
Storage Type               : NonVolatile
Row Status                 : Active

History

This command was first available in ExtremeXOS 10.1.

The hex_profile_name and hex_param_name parameters were added in ExtremeXOS 11.0.

Platform Availability

This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.