Configures the SNMPv3 INFORM notification timeout.
| hex_addr_name | Specifies the address name in hexadecimal format. |
| addr_name | Specifies the address name in ASCII format. |
| timeout_val | Specifies the number of seconds. |
The timeout value default is 15 seconds.
Use this command to configure how many seconds to wait for a response before resending an SNMPv3 INFORM.
The following command configures a timeout value of 20 seconds for the target address A1:
configure snmpv3 target-addr A1 timeout 20
This command was first available in ExtremeXOS 12.5.3.
This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.