Creates a network-zone with a specified name.
| access-list | Access list |
| network-zone | Network zone |
| zone_name | Network zone name |
N/A.
Use this command to create a network-zone with a specified name. The network-zone can then be associated with the policy file using either the "source-zone" or "destination-zone" attribute.
Switch# create access-list network-zone zone1
If the user tries to create a network-zone that was already created, the following error message will be displayed on the console, and the command will be rejected.
Switch#create access-list network-zone zone1 Error: Network Zone "zone1" already exists.
This command was first available in ExtremeXOS 15.2.
This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.