show cfm segment frame-loss statistics {segment-name}
Displays shows frame-loss statistics.
|
segment_name |
An alpha numeric string identifying the segment name. |
N/A.
The below output is an example for displaying the frame-loss stats for the cfm segments. This command shows the recent, minimum, maximum and average near-end and far-end frame loss ratios during the current transmission. The stats for a particular segment will be preserved till the user triggers the next LMM transmission or until it does a clear counter.
The following command displays the frame loss statistics for the CFM segment:
LEFT.93 # show cfm segment frame-loss statistics
---------------------------------------------------------------
Segment Name MEP Last Last Min Max Min Max Mean Mean
ID NE FE NE NE FE FE NE FE
FLR FLRFLRFLRFLRFLRFLR NLR
----------------------------------------------------------------------
seg1 111 10 10 10 10 10 10 10 10
seg1 222 10 10 10 10 10 10 10 10
seg2 333 10 10 10 10 10 10 10 10
----------------------------------------------------------------------
Legend: FE - Far End, NE - Near End, FLR - Frame Loss Ratio
Window FE FLR Last FE Tx Last FE Rx
----------------- ------ ------------- ---------- ----------
cs2 3 0.000000e+00 509467221 526672689
0.000000e+00 501936465 544907407
---------------------------------------------------------------
Legend: FE - Far End, NE - Near End, FLR - Frame Loss Ratio
This command was first available in ExtremeXOS 15.1.
This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.