Configures the remote ID sub-option that identifies the relaying switch for DHCP requests and replies.
| remote_id | Specifies a text string that becomes the remote ID sub-option for the switch. Specify a text string composed of 1 to 32 characters. |
| system-name | Specifies that the switch name is used as the remote ID sub-option for the switch. |
| vrid | Specifies the VR on which to configure the remote ID sub-option. |
The switch MAC address.
To display the remote-ID, use the following command: show bootprelay
The following example configures the remote ID sub-option to specify the switch name in DHCP requests and replies:
configure bootprelay dhcp-agent information remote-id system-name
This command was first available in ExtremeXOS 12.4.
This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.