disable bootprelay ipv6

disable bootprelay { ipv4 | ipv6} {vlan vlan_name} | { vr vr_name} | all {vr vr_name}

Description

Disables BOOTPRelay v6. This can be done across the VR or on a per VLAN basis.

Syntax Description


bootprelay	BOOTP Relay service.
IPv4	DHCPv4 BOOTP Relay service.
IPv6	DHCPv6 BOOTP Relay service.

`vlan_name`	Specifies the VLAN name

`vr_name`	Specifies the vrtual router name.
all	Disables all VLANs.

Default

N/A.

Usage Guidelines

Use this command to disable BOOTP Relay across the VR or on a per VLAN basis.

Example

The following command displays IPv6 bootprelay information:

* switch #  show bootprelay ipv6
BOOTP Relay: DHCPv6 BOOTP Relay enabled on virtual router "VR-Default"    
    BOOTP Relay Servers : 2001:0db8:85a3:0000:0000:8a2e:0370:7334                         
                          2001:0db8:85a3:0000:0000:8a2e:0370:7335                         
                          2001:0db8:85a3:0000:0000:8a2e:0370:7336                         
                          2001:0db8:85a3:0000:0000:8a2e:0370:7337
VLAN "Default":     
   BOOTP Relay          : Disabled
VLAN "v1":    
   BOOTP Relay          : Enabled    
   BOOTP Relay Servers  : 2001:0db8:85a3:0000:0000:8a2e:0370:7338    
   Interface ID         : v1-12     
    Remote ID           :v1_remId
VLAN"v2":    
   BOOTP Relay          : Enabled    
   BOOTP Relay Servers  : 2001:0db8:85a3:0000:0000:8a2e:0370:7339    
   Interface ID         : 100 (Default)     
   Remote ID            : 00:04:96:52:A7:1B (Default)

History

This command was first available in ExtremeXOS 15.5.

Platform Availability

This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the PIM feature, see the ExtremeXOS 30.7 Feature License Requirements document.