Clears a previously configured software-controlled redundant port.
|
port_list |
This refers to the primary port of the redundant pair and specifies one or more ports or slots and ports. |
N/A.
The list of port numbers or the port display string specifies the primary port(s).
The following command unconfigures a software-controlled redundant port on a switch:
unconfigure ports 3 redundant
This command was available in ExtremeXOS 11.1.
This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.