Enables Cisco Discovery Protocol (CDP) on a port.
| port_list | Specifies the list of ports to enable CDP on. |
| all | Specifies that you enable CDP on all ports. |
Enabled.
The following command enables CDP on all ports on the switch:
enable cdp ports all
This command was first available in ExtremeXOS 15.4.
This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.