Adds a notification log.
| name | Specifies the name of the log. |
| hex | Provide value in hexadecimal. |
| hex_name | Name of the log in hexadecimal. |
| user | Name of the SNMP user on whose behalf the log should be created. |
| snmp_user_name | SNMP user name in ASCII.. |
| hex_snmp_user_name | SNMP user name in hexadecimal. |
| sec-model | Security framework associated with the user. |
| sec_model | Security model. |
| sec-level | Authentication and privacy levels of the user. |
| sec_level | Security level. |
Disabled.
Use this command to add a notification log. All entries in the log and its configuration are removed when this command is successfuly executed.
The following example adds nmslog1:
configure snmp add notification log nmslog1 user admin sec-model usm sec-level priv
This command was first available in ExtremeXOS 15.5.
The hex keyword, hex_name variable, and hex_snmp_user_name variable were added in ExtremeXOS 15.6.
This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.