Enable BFD on an OSPFv3-enabled Interface

BFD sessions can be configured on one or more OSPFv3-enabled interfaces.

About this task

This procedure is a prerequisite for Configure BFD for OSPFv3 Globally and Configure BFD for OSPFv2 Globally in a Non-default VRF Instance.

Procedure

  1. Access global configuration mode. 
    device# configure terminal
  2. Access interface configuration mode. 
    device(config)# interface ve 24
  3. Enable BFD on the interface. 
    device(config-if-Ve-24)# ipv6 ospf bfd
9036691-01 Rev AA