You can configure an IPv6 prefix list for basic traffic filtering.
Procedure
-
Access global configuration
mode.
device# configure terminal
-
Configure an IPv6 prefix list.
(config)# ipv6 prefix-list prefix-filter-1 permit FE80::/10 ge 25 le 25
The ge
ge-value or le
le-value that you specify must meet the following condition
for prefix-length: ge-value <= le-value <= 128.
If you do not specify ge
ge-value or le
le-value, the prefix list matches only on the exact prefix you
specify with the ipv6-prefix/prefix-length parameter.
