Enabling and configuring the ACL log buffer

Among the conditions required for ACL logging is that the ACL log buffer be enabled and configured.

1. Enter the debug access-list-log buffer command to enable and configure ACL log buffering.
   

   device# debug access-list-log buffer circular packet count 1600
   

2. (Optional) To display the current ACL log buffer configuration, enter the show access-list-log buffer config command.
   

   device# show access-list-log buffer config
   ACL Logging is enabled 
   Buffer exists for interface Eth 1/11 
   Buffer type is Circular and size is 1000