LAG profile support-scope

Maximum numbers of port-channel IDs and links per port-channel vary with device and profile.

SLX 9540 and SLX 9640 devices

For this group of devices, maximum numbers of port-channel IDs and links per port-channel vary with device and LAG profile, as follows:
Table 1. Port-channel scale for SLX 9540 and SLX 9640 devices

Device or series

LAG profile

Supported port-channel IDs

Maximum links per port-channel

SLX 9540 SLX 9640

default

1–256; Only 64 port-channels may be created at any one time.

64

SLX 9540 SLX 9640

lag-profile-1

1–256; Only 64 port-channels may be created at any one time.

32

SLX 9150 and SLX 9250 devices

For this group of devices, maximum numbers of port-channel IDs and links per port-channel vary only with device, as follows:
Table 2. Port-channel support for SLX 9150 and SLX 9250 devices

Device or series

Supported port-channel IDs

Maximum links per port-channel

SLX 9150, SLX 9250

1–256; Only 128 port-channels may be created at any one time.

64

Note

Note

Non-default LAG profiles are not supported for the SLX 9150 and SLX 9250 devices.

Example

The following example enables lag-profile-1.

device# configure terminal 
device(config)# hardware 
device(config-hardware)# profile lag lag-profile-1 
%Warning: To activate the new profile config, please run 'copy running-config startup-config' followed by 'reload system'.
device(config-hardware)#