Configuring Non-Isolated Subscriber VLAN Ports

The process for configuring non-isolated VLAN ports requires two tasks:

  • Add a VLAN to the PVLAN as a non-isolated subscriber VLAN.
  • Assign ports to the non-isolated subscriber VLAN.
These tasks can be completed in any order, but they must both be completed before a port can participate in a PVLAN. When configuration is complete, all egress traffic from the port is translated to the VLAN tag for that non-isolated VLAN (unless the port is configured as untagged).


To configure VLAN translation for network VLAN ports, see Configuring Network VLAN Ports for VLAN Translation.
If you specify the tagged option, egress traffic uses the non-isolated VLAN tag, regardless of the network translation configuration on any network port with which these ports communicate. Egress traffic from a non-isolated VLAN port never carries the network VLAN tag.