EXTREME-SYSTEM-MIB

The following tables, groups, and variables are supported in this MIB.

Table/Group Supported Variables Comments
extremeSaveConfiguration When this object is set, the device copies the contents of the configuration database to a buffer and saves it to the persistent store specified by the value of the object. The save is performed asynchronously, and the SNMP agent continues to respond to both gets and sets while the save is taking place. A network management application may use the extremeSaveStatus object to determine when the asynchronous save operation has completed.
extremeSaveStatus This object returns the status of a save operation invoked by setting the extremeSaveConfiguration object. A network management application can read this object to determine that a save operation has completed.
extremeCurrentConfigInUse Shows which NVRAM configuration store was used at last boot.
extremeConfigToUseOnReboot Controls which NVRAM configuration store will be used on next reboot.
extremeOverTemperatureAlarm Alarm status of overtemperature sensor in device enclosure.
extremePrimaryPowerOperational Not supported. Always returns True.
extremePowerStatus Not supported. Always returns presentOK.
extremePowerAlarm Not supported. Always returns False.
extremeRedundantPowerStatus
extremeRedundantPowerAlarm Not supported. Always returns presentOK.
extremeInputPowerVoltage Contains the input voltage of the latest power-supply to power-on in a system with multiple power-supplies.
extremePrimarySoftwareRev This value indicates the revision number of the software image on the primary partition.
extremeSecondarySoftwareRev This value indicates the revision number of the software image on the secondary partition.
ExtremeImageToUseOnReboot This value indicates the partition where the software image is located and to be used on the next boot.
extremeSystemID This represents the system ID of a switch.
extremeSystemBoardID Not supported.
extremeSystemLeftBoardID
extremeSystemRightBoardID
extremeRmonEnable
extremeBootROMVersion Returns information for the current MSM only.
extremeDot1dTpFdbTableEnable Not supported.
extremeHealthCheckErrorType

extremeHealthCheckAction
extremeHealthCheckMaxRetries
extremeCpuUtilRisingThreshold
extremeCpuTaskUtilPair
extremeCpuAggregateUtilization
extremeCpuUtilRisingThreshold
extremeAuthFailSrcAddr
extremeCpuTransmitPriority
extremeImageBooted
extremeFanStatusTable extremeFanStatusEntry Operational status of all internal cooling fans.
extremeFanNumber Identifier of cooling fan, numbered from the front and/or left side of device.
extremeFanOperational Operational status of a cooling fan.
extremeFanEntPhysicalIndex The entity index for this fan entity in the entityPhysicalTable table of the entity MIB.
extremeFanSpeed The speed (RPM) of a cooling fan in the fantray.
extremeCpuTaskTable All objects Not supported.
extremeCpuTask2Table All objects Not supported.
extremeSlotTable All objects Cards are currently not configurable via SNMP.
extremePowerSupplyEntPhysicalIndex extremePowerSupplyEntPhysicalIndex The entity index for this psu entity in the entityPhysicalTable of the entity MIB.
extremePowerSupplyNumber extremePowerSupplyNumber Power supply number.
extremePowerSupplySerialNumber extremePowerSupplySerialNumber The serial number of the power supply unit.
extremePowerSupplySource extremePowerSupplySource The power supply unit input source.
extremePowerSupplyTable extremePowerSupplyStatus Status of the power supply.
extremePowerSupplyInputVoltage Input voltage of the power supply.
extremePowerSupplyFan1Speed The speed of Fan-1 in the power supply unit.
extremePowerSupplyFan2Speed The speed of Fan-2 in the power supply unit.
extremePowerSupplyInputPowerUsage Input power usage for the given psu slot. The value 0 in this field indicates the power usage is not supported or that there is a read failure.
extremePowerMonSupplyNumOutput Number of output sensors in the power supply unit.
extremePowerSupplyInputPowerUsageUnitMultiplier The magnitude of watts for the usage value in extremePowerSupplyInputPowerUsage.
extremePowerSupplyTotalPowerAvailable Total power available.
extremePowerSupplyOutputVoltage Output voltage.
extremePowerSupplyOutputCurrent Output current.
extremePowerSupplyOutputPowerTable extremePowerSupplyIndex Power supply unit slot index.
extremePowerSupplyOutputSensorIdx Power supply Sensor index.
extremePowerSupplyOutputVoltage Output voltage per sensor for the current PSU slot number. A zero (0) in this field indicates that the PSU does not support output voltage reading or else there is an output voltage read error.
extremePowerSupplyOutputCurrent Output current per sensor for the current PSU slot number. A zero (0) in this field indicates that the PSU does not support output current reading or else there is an output current read error.
extremePowerSupplyOutputUnitMultiplier The magnitude of volts and amps for the usage value in extremePowerSupplyOutputVoltage and extremePowerSupplyOutputCurrent.
extremePowerSupplyUsageTable extremeSlotIndex Slot number in the stack- based system.
extremePowerSupplyUsageValue Power usage of the particular slot in the stack. The power usage is measured in milliwatts.
extremePowerSupplyUnitMultiplier The magnitude of watts for the usage value in extremePowerSupplyUsageValue.
extremeSystemPowerUsage extremeSystemPowerUsageValue The current power usage of the system. In stack mode. this variable tells the total power usage of the entire system.
extremeSystemPowerUsageUnitMultiplier The magnitude of watts for the usage value in extremeSystemPowerUsageValue.
extremeSystemPowerMonitorTable extremeSystemPowerMonitorIndex1 Reserved. Can be used for future expansion. Currently set to zero.
extremeSystemPowerMonitorPollInterval Configure how often input power is measured. It is configured in seconds with a default value of 60 seconds. If zero (0) is configured, then the input power measurement is disabled.
extremeSystemPowerMonitorReportChanges