Miscellaneous Configuration

1. Go to Configuration → Devices → System Profiles.

   A list of default and user-created profiles is displayed.

2. Select a target profile from the displayed list.

   The selected profile's configuration menu is displayed.

3. Expand the Advanced menu and select Miscellaneous.
   

   Advanced Profile Overrides - Miscellaneous Screen

   
4. Set a NAS-Identifier Attribute up to 253 characters in length.

   This is the RADIUS NAS-Identifier attribute that typically identifies where a RADIUS message originates.

5. Set a NAS-Port-Id Attribute up to 253 characters in length.

   This is the RADIUS NAS port ID attribute which identifies the device port where a RADIUS message originates.

6. Select Turn on LEDs to enable an adopted access point‘s LEDs.

   This feature is enabled by default.

7. Select Flash Pattern(2) to enable the access point to blink in a manner different from its operational LED behavior.

   Enabling this option allows an administrator to validate that the access point has received its configuration from its managing controller during staging. In the staging process, the administrator adopts the access point to a staging controller to get an initial configuration before the access point is deployed at its intended location. Once the access point has received its initial configuration, its LED blinks in a unique pattern to indicate the initial configuration is complete.

8. Use the drop-down menu to configure the access point‘s Meshpoint Behavior.

   This field configures the access point‘s mobility behavior. The default is External (fixed), which means that the mesh point is fixed. The value vehicle-mounted means that the mesh point is mobile. This feature is available only on an AP 7161 model access point.

9. Select Capable, in the RF Domain Manager section, to designate this specific device as being the RF Domain manager for a particular RF Domain.

   The default value is enabled.

10. Select Priority, in the RF Domain Manager section, to set a priority value for this specific profile managed device. O

    Once enabled, use the spinner control to set a device priority between 1 - 255. The higher the number you select, the higher the priority in the RF Domain manager election process.

11. Use Root Path Monitor Interval to configure the interval to monitor the path to the root node.
12. Set the Additional Port value, in the RADIUS Dynamic Authorization section, to enable a Cisco ISE (Identity Services Engine) (AAA) (Authentication, Authorization and Accounting) server to dynamically authenticate a client.

    Set this value to 1700. The allowed port range is 1 to 65,535.

    When a client device requests access to the network, the Cisco ISE RADIUS server presents the client with a URL where a device‘s compliance is checked for definition file validity (this form of file validity checking is called posture). The check verifies, for example, that the device's anti-virus or anti-spyware software is valid. If the device complies, it is allowed access to the network.

13. Click OK to save the changes made to the profile's advanced miscellaneous configuration.

    Click Reset to revert to the last saved configuration.