Profile Network Configuration
Setting an access point profile‘s network configuration is a large task
comprised of numerous administration activities.
Before defining a profile‘s network configuration, refer to the following deployment guidelines
to ensure the profile configuration is optimally effective:
- Administrators often need to route traffic to interoperate between different VLANs. Bridging
VLANs are only for non-routable traffic, like tagged VLAN frames destined to some other device
which will untag it. When a data frame is received on a port, the VLAN bridge determines the
associated VLAN based on the port of reception.
- Static routes, while easy, can be overwhelming within a large or complicated network. Each
time there is a change, someone must manually make changes to reflect the new route. If a link
goes down, even if there is a second path, the router would ignore it and consider the link
down.
- Static routes require extensive planning and have a high management overhead. The more
routers that exist in a network, the more routes need to be configured. If you have N number of
routers and a route between each router is needed, then you must configure N x N routes. Thus,
for a network with nine routers, you will need a minimum of 81 routes (9 x 9 = 81).
An access point profile network configuration process consists of the following:
Print
this page
Email this topic
Feedback
View PDF
Download EPUB