Access Point Health

1. Select Dashboard → Summary.
2. Expand the System node to display RF domains.
3. Expand an RF domain and select an access point from the list of managed devices.

   The selected access point's Health screen displays by default.

   

   Access Point Screen - Health Tab

   
4. Review the following information:
   • Device Details - displays the following information for the selected access point:

     Hostname	Lists the administrator assigned name of the selected access point.
     Device MAC	Lists the factory encoded MAC address of the selected access point.
     Primary IP	Lists the IP address assigned to the access point as a network identifier.
     Type	Indicates the access point model type. An icon representing the access point is displayed along with the model number.
     RF Domain Name	Lists the RF Domain to which the access point belongs. The RF Domain displays as a link that can be selected to display access point RF Domain membership data in greater detail.
     Model Number	Lists the specific model number of the access point.
     Version	Lists the version of the firmware running on the access point. Compare this version against the version currently on the support site to ensure the access point has the latest feature set available.
     Uptime	Displays the duration the access point has been running from the time it was last restarted.
     CPU	Displays the CPU installed on this access point.
     RAM	Displays the amount of RAM available for use in this system.
     System Clock	Displays the current time on the access point.

   • Radio RF Quality Index - displays the bottom five (5) RF quality values for the access point‘s single default RF Domain. These values are a measure of the overall effectiveness of the RF environment displayed in percentage. It is a function of the data rate in both directions, the retry rate and error rate. The quality is measured as:
     • 0-20 - Very poor quality

       20-40 - Poor quality

     • 40-60 - Average quality
     • 60-100 - Good quality

     The access point‘s RF Domain allows an administrator to assign configuration data to multiple devices deployed in a common coverage area, such as in a floor, building or site. The RF Domain contains policies that can determine a Smart RF or WIPS configuration. Use this diagnostic information to define measures to improve radio performance in respect to wireless client load and radio band.

     Periodically select Refresh (at the bottom of the screen) to update the RF quality data.

   • Radio Utilization - field displays how efficiently the RF medium is used by the access point. Radio utilization is defined as the percentage of current throughput relative to the maximum possible throughput for the radio. The Radio Utilization displays radios in terms of the number of associated wireless clients and percentage of utilization. It also lists packets types transmitted and received.

     Refer to the number or errors and dropped packets to assess radio performance relative to the number of packets both transmitted and received.

     Periodically select Refresh (at the bottom of the screen) to update the radio utilization information displayed.

   • Client RF Quality Index - displays a list of the worst 5 performing clients managed by the selected access point. It is a measure of the overall effectiveness of the RF environment displayed in percentage. It is a function of the connect rate in both directions, the retry rate and the error rate. The quality is measured as:
     • 0-20 - Very poor quality
     • 20-40 - Poor quality
     • 40-60 - Average quality
     • 60-100 - Good quality

     Periodically select Refresh (at the bottom of the screen) to update client RF quality.