AP Sensor Servers

Sensor Servers allow the monitor and download of data from multiple access points in sensor mode and remote locations using Ethernet TCP/IP or serial communication. Repeaters are available to extend the transmission range and combine sensors with various frequencies on the same receiver.

To view the network address and status information of the sensor server resources available to the access point:

1. Select the Statistics menu from the Web UI.
2. Expand the System node from the navigation pane (on the left-hand side of the screen). The System node expands to display the RF Domains created within the managed network.
3. Expand an RF Domain node, and select one of it's connected access points. The access point's statistics menu displays in the right-hand side of the screen, with the Health tab selected by default.
4. Select Sensor Servers.
   The Statistics > AP > Sensor Servers screen displays.

   

   
   This screen displays the following:

   IP Address	Displays a list of sensor server IP addresses or administrator assigned hostnames. These are the server resources available to the access point for the management of data uploaded from dedicated sensors.
   Port	Displays the numerical port where the sensor server is listening. Unconnected server resources are not able to provide sensor reporting.
   Status	Displays whether the server is currently connected or not connected.

5. Select Refresh to update the screen's statistics counters to their latest values