AP NAT Translations

NAT is a technique to modify network address information within IP packet headers in transit. This enables mapping one IP address to another to protect wireless controller managed network address credentials. With typical deployments, NAT is used as an IP masquerading technique to hide private IP addresses behind a single, public facing, IP address.

NAT can provide a profile outbound Internet access to wired and wireless hosts connected to either an access point or a wireless controller. Many-to-one NAT is the most common NAT technique for outbound Internet access. Many-to-one NAT allows an access point or wireless controller to translate one or more internal private IP addresses to a single, public facing, IP address assigned to a 10/100/1000 Ethernet port or 3G card.

To view the Firewall's NAT translations:

  1. Select the Statistics menu from the Web UI.
  2. Expand the System node from the navigation pane (on the left-hand side of the screen). The System node expands to display the RF Domains created within the managed network.
  3. Expand an RF Domain node, select a controller or service platform, and select one of its connected access points. The access point's statistics menu displays in the right-hand side of the screen, with the Health tab selected by default.
  4. Expand the Firewall menu.
  5. Select NAT Translations.
    The Statistics > AP > Firewall > NAT Translations screen displays in the right-hand pane.
    Click to expand in new window
    This screen displays the following information:
    Protocol

    Displays the IP translation protocol as either TCP, UDP or ICMP.
    Forward Source IP

    Displays the internal network IP address for forward facing NAT translations.
    Forward Source Port

    Displays the internal network port for forward facing NAT translations.
    Forward Dest IP

    Displays the external network destination IP address for forward facing NAT translations.
    Forward Dest Port

    Displays the external network destination port for forward facing NAT translations.
    Reverse Source IP

    Displays the internal network IP address for reverse facing NAT translations.
    Reverse Source Port

    Displays the internal network port for reverse facing NAT translations.
    Reverse Dest IP

    Displays the external network destination IP address for reverse facing NAT translations.
    Reverse Dest Port

    Displays the external network destination port for reverse facing NAT translations.
  6. Select Refresh to update the screen's statistics counters to their latest values.
9036512-01 Rev AB