The
Device Configuration screen displays. This
screen lists access points, controllers and service
platforms within the managed network.
Select a
target device by double-clicking on the device name.
You can
also select a target device from the device browser in the
lower, left-hand, side of the UI.
The
selected device's configuration menu displays.
Go to RF Domain Overrides → WLAN
Override.
Note
The WLAN Override option is available
only for access points – not for controllers or
service platforms.
The WLAN
Override screen displays with the
Override SSID tab selected by
default.
WLAN Override screen - Override SSID Tab
Define up to three overrides for
the listed WLAN SSID assignment:
WLAN
Optionally use the drop-down menu to change the WLAN
assignment for the listed access point. Click the Create icon to define a new WLAN
configuration, or click the Edit
icon to modify an existing WLAN
configuration.
SSID
Optionally change the SSID associated with the WLAN. The
WLAN name is auto-generated using the SSID until it is
changed (overridden). The maximum number of characters used
for the SSID is 32.
Click + Add Row as needed to add
additional WLAN SSID overrides.
Note
A blue override icon (to the left of a parameter)
defines the parameter as having an override applied. To remove an override
go to the Basic
Configuration section of the device and click Clear Overrides. This
removes all overrides from the device.
Click OK to save the
changes.
Click Reset to revert
to the last saved configuration.
