Wireless Controller and Service Platform System Reference Guide

Select the Priority Mapping tab.

Set the following parameters for IP DSCP mappings for untagged frames:


DSCP	Lists the DSCP value as a 6-bit parameter in the header of every IP packet used for packet classification.
802.1p Priority	Assign a 802.1p priority as a 3-bit IP precedence value in the Type of Service field of the IP header used to set the priority. The valid values for this field are 0-7. Up to 64 entries are permitted. The priority values are: 0 – Best Effort 1 – Background 2 – Spare 3 – Excellent Effort 4 – Controlled Load 5 – Video 6 – Voice 7 – Network Control Use the spinner controls within the 802.1p Priority field for each DSCP row to change its priority value.

Set or override the following parameters for IPv6 Traffic Class Mapping for untagged frames:


Traffic Class	Devices that originate a packet must identify different classes or priorities for IPv6 packets. Devices use the traffic class field in the IPv6 header to set this priority.
802.1p Priority	Assign a 802.1p priority as a 3-bit IPv6 precedence value in the Type of Service field of the IPv6 header used to set the priority. The valid values for this field are 0-7. Up to 64 entries are permitted. The priority values are: 0 – Best Effort 1 – Background 2 – Spare 3 – Excellent Effort 4 – Controlled Load 5 – Video 6 – Voice 7 – Network Control

Select the OK button located at the bottom right of the screen to save the changes.

Select Reset to revert to the last saved configuration.

QoS Priority Mapping Configuration