About this task
You can configure device upgrade operation at the RF Domain
level. RF Domain upgrades happen through the RF Domain manager.
The RF Domain manager, requests and receives the firmware from
the controller and upgrades RF Domain member devices. Therefore,
prior to configuring device upgrade on the RF Domain, ensure the
Controller is upgraded to the latest firmware. For more
information, see Upgrading Device Firmware.
To configure RF Domain level
device upgrade:
Procedure
-
Go to Operations → Devices.
-
Expand the
System node and selected a member
RF Domain.
-
Select the
Device Upgrade tab.
-
Select the Device Upgrade List tab,
if not selected by default.
-
Use the Device Type List drop-down
menu to select the type of device to be upgraded. This is
the device model used to provision firmware to the devices
selected within the All Devices table
below.
Select the All option to initiate
upgrade of all devices within the selected RF Domain. If
you select this option, the All Devices
table is disabled.
-
Select the Upgrade from Controller
checkbox to initiate upgrade through the
controller to which the selected device is adopted.
-
Use the Scheduled Upgrade Time and
Scheduled Reboot Time options to
schedule the upgrade at a latter time.
By default, both the Scheduled Upgrade
Time and Scheduled Reboot
Time options are set to
Now, which initiates immediate
upgrade.
