| Level 2 Area ID |
Define a Level 2 Area ID for the Mint Policy. The Level 2 Area ID
is the global mint area identifier. This area identifier separates two
overlapping mint networks and need only be configured if the
administrator has two mint networks that share the same packet
broadcast domain. |
| MTU |
Specify a MTU value for the mint policy between 900 and 1,500. The
MTU setting specifies the maximum packet size used for mint packets.
Larger packets will be fragmented so they fit within this packet size
limit. The administrator may want to configure this parameter if the
mint backhaul network requires or recommends smaller packet sizes. The
default value is 1500. |
| UDP/IP Encapsulation Port |
Specify the port to use for UDP/IP encapsulation between 2 and
65,534. This value specifies an alternate UDP port used by mint
packets (and must be an even number). This port is used by mint
control packets, and this port's value plus 1 is used to carry mint
data packets. The default value is 24576. |
