The OSPF VLAN Interface
Dynamic Routing configuration screen displays.
OSPF - VLAN Interface
- Dynamic Routing Screen
In the OSPF Settings field,
override the following parameters:
Priority
Select this option to set the OSPF priority used to
select the network designated route. Use the spinner control
to set the value from 0 - 255.
Cost
Select this option to set the cost of the OSPF interface.
Use the spinner control to set the value from 1 -
65,535.
Bandwidth
Set the OSPF interface bandwidth (in Kbps) from 1 -
10,000,000.
Use the Chosen Authentication Type
drop-down to select the authentication type used to validate
credentials within the OSPF dynamic route. Options include: simple-password,
message-digest, null and None. The default is
None.
In the MD5 Authentication
table, click + Add Row
and configure the following:
MD5 is a message digest
algorithm using a cryptographic hash producing a 128-bit (16-byte) hash value,
usually expressed in text as a 32 digit hexadecimal number. MD5 has been
utilized in a wide variety of cryptographic applications, and is also commonly
used to verify data integrity.
Key ID
Use the spinner control to set the OSPF message digest
authentication key ID. The available range is from 1 - 255.
Password
Set the password (associated with the Key ID) used for an
MD5 validation of authenticator credentials. The password is
the OSPF key either displayed as series or
asterisks.
Click OK to save the
changes.
Click Exit to close the
screen without saving the updates.
