debug ipv6 dhcp pd

Sets the debugging parameters for the DHCP PD feature.

Syntax

debug ipv6 dhcp pd { all | datafile | pd-option | rib }

Command Default

None

Parameters

all: Enables all Prefix Delegation debugging.
datafile: Enables Prefix Delegation debugging and writing to the iphelperv6_delegated_prefixes_data file.
pd-option: Enables debugging for processing Prefix Delegation options in the DHCPv6 messages.
rib: Enables debugging the DHCPv6 interface with the RIB module.

Modes

Privileged EXEC mode

Usage Guidelines

Diagnostic commands are developed and intended for specialized troubleshooting. Work closely with Extreme Networks technical support when running debug or show system internal commands and interpreting their results.

This command enable debugging of DHCPv6 Prefix Delegation and configures its debugging parameters.

Use the no form of this command to disable debugging.

Examples

The following debug command enables capturing debug information for DHCPv6 Prefix Delegation.

SLX# debug ipv6 dhcp pd all