Creates a bypass LSP by using the bypass-lsp command. Thereafter, in the bypass LSP context, you must specify at least one interface as an excluded or protected interface.
MPLS router configuration mode
The name variable must be unique among all regular LSPs and bypass LSPs.
The no form of the command deletes the bypass LSP from the system.
MPLS is supported on the Extreme 8820, SLX 9740, SLX 9640, and SLX 9540 devices only.
The following example selects the xm4-by LSP as a bypass LSP.
device>configure device(config)# router mpls device(config-router-mpls)# bypass-lsp xm4-by device(config-router-mpls-bypasslsp-xm4-by)#