show running-config mac access-list

Displays a list of MAC ACLs defined on the switch, including the rules they contain.

Syntax

show running-config mac access-list [ { standard | extended } [ ACL_name ] ]

Parameters

standard: Specifies the standard ACL type.
extended: Specifies the extended ACL type.
ACL_name: Specifies the ACL name.

Modes

Privileged EXEC mode

Usage Guidelines

This command is supported only on the local switch.

Not specifying standard or extended displays a list of all MAC ACLs defined on the switch.

If you specify standard or extended, you can also specify an ACL.

To display details of all MAC ACLs bound to interfaces, use the show access-list mac command.

Examples

The following example displays all MAC ACLs defined on the switch.

device# show running-config mac access-list
mac access-list standard stdmacaclin
seq 11 permit 1111.1112.1113 7777.7777.7777 count log
seq 12 permit 1111.1112.1114 7777.7777.7777 count log