ntp (tpvm mode)

Configures the Network Time Protocol (NTP) server for TPVM instance. Supports IPv4 and IPv6 addresses.

Syntax

ntp { ipv4-address | ipv6-address }

Parameters

{ ipv4-address | ipv6-address }: Configures the NTP server by their IPv4 and / or IPv6 address.

Modes

TPVM Configuration mode

Usage Guidelines

Up to five (5) NTP servers can be configured for TPVM using their IPv4 and / or IPv6 addresses.

Examples

Example

This example displays possible completion of NTP configuration for TPVM.

SLX(config-tpvm-1)# ntp ? 
    Possible completions: 
        <A.B.C.D IP address in dotted decimal> 
        <string, min: 1 char, max: 253 chars> 
    NTP server IPV4 address or FQDN 
        <A:B::C:D IPV6 address> 
SLX(config-tpvm-1)# ntp 100:23::45:55 ? 
    Possible completions: 
    <cr>